Suppliers
Hereafter an itinerary of our suppliers:
Ircon 
Infrared sensors
Infrared non contact temperature measurement systems. Systems for fixed line-ups for continuous measurement in processes. Temperature range: -50 to 3500 °C. Deliverable with software and calibration certificate.
Neoptix 
Fiber Optic Temperature Measurement:
Fiber Optic thermometers for temperature measurements in magnetic fields, RF-, microwave fields, high voltage and radiological surroundings. Temperature range: -272 to 250°C. Accuracy: 0,2°C. Deliverable in 1-, 2-, 4- or modular multi channels (till 1.024 channels).
Powertrol 
Powertrol description_short_en
Powertrol's flare stack monitoring system contains a unique infrared optical unit. It detects flux density changes in the hydrocarbon flames of flare stack burnoff. Powertrol systems generate a continuous process variable signal for control purposes. The signal is proportional to the amount of unburned carbon in the flare. Flare gas composition, density, or flow rate does not hinder the accuracy of the system's signal. Get smokeless flare operation using Powertrol. The Powertrol monitor provides the process variable signal for steam control, allowing only the steam necessary for complete and smokeless combustion. No more, no less. Steam is used efficiently and economically. Noise from excess steam is eliminated. Powertrol's fast response time assures a smokeless flare, assisting in meeting or exceeding both state and local emission and noise specifications. Powertrol systems are quickly installed and easily maintained. Internal components are not exposed to flare gas or flame. Installation is simple and fast. The Powertrol system operates from an accessible location with minimum maintenance. Low installation and maintenance costs help you realize a quick return on your investment. In many cases, savings on steam cost alone will pay for your system within weeks. The Powertrol system now available is built following the highest standards of quality. Choose the Powertrol system for your needs and get smokeless flare operation. Powertrol's Pilot Monitoring System monitors flarestack pilot operations and provides you with a continuous output signal for efficient pilot control. Unlike most thermocouple systems, Powertrol's Pilot Monitoring System uses an infrared optical unit to determine pilot flame status. Flame status is then continuously transmitted as a linear signal. This versatile signal can function as an alarm for flame-out, as a trigger for auto ignition systems, as a regulator of fuel gas usage, and for recording/reporting purposes. Powertrol's Pilot Monitoring System is equal or exceeds thermocouples for pilot flame monitoring and control. Infrared optical technology enables the Pilot Monitoring System to operate in a remote plant location, safely away from flarestacks. Installation is simple and quick. Expensive installation equipment is not needed. Unlike thermocouples, plant/flarestack shutdown is unnecessary for installation and subsequent maintenance, resulting in both immediate and long-term savings. The optical sensing unit of the Pilot Monitoring System is in full compliance with EPA recommendations for pilot flame monitoring and control. Developed from the successful Powertrol's Flare Stack Monitoring System, the Pilot Monitoring System is field-tested and backed with Powertrol's proven reputation. Because pilot flame monitoring is an integral aspect of efficient flame operations, choose Powertrol's Pilot Monitoring System for cost-effective compliance and continuous dependable performance
Scangrip Of EP 
Leak detection:
Instruments for detecting expensive leakages in compressed air, gas, and vacuum installations, tanks, windows in vehicles etc. but also for detecting mechanical damaging of moveable parts such as ball-bearing and gear casing.
Hydepark 
Hydepark ultrasonic sensors:
Ultrasonic sensors and level detection equipment. In dual-level or analog version. For detection of glass, metal, powders, liquids, etc. Virtually unaffected by humidity and filthiness. Protection rating IP67! Among other things for monitoring of pumps or detection of jars, cans, bottles and foil.
Lamerholm Electronics 
The ShockLog range of impact and environmental recorders have been specifically designed to help companies reduce the cost of damage to goods whether in production, transit or storage.
ShockLog: The ShockLog range of impact and environmental recorders have been specifically designed to help companies reduce the cost of damage to goods whether in production, transit or storage. Lamerholm manufactures and supplies a range of fully programmable, reusable electronic recorders that enable the ongoing monitoring of shock and other environmental influences on a moving or stationary product or structure. As well as providing a way to reduce damage, the ShockLog recorders acts as a visible deterrent to discourage inappropriate handling and ensure storage and handling guidelines are adhered to. One of the main features of ShockLog is the fact that the real time date stamp pinpoints exactly when an incident has occurred. This means it can be used as arbitration evidence. There are several versions of the ShockLog available to meet most monitoring and recording situations, with a number of accessories designed to enhance their operation and data capture.
Liebherr 
Reliable measurement and correction of moisture levels in materials is crucial for ensuring the quality of mixtures. The tried-and-tested Litronic-FMS II moisture measurement system uses up to 16 interconnected sensors. The moisture measurements are collected in the signal averager of the sensor electronics and transferred to the control unit so that the water content of the mixture can be adjusted in the same batch. Reliable moisture measurement guarantees high quality. A wide range of interfaces mean the moisture measurement system can be easily integrated into production. For more information or if you have any questions, please e-mail: thomas.maier@liebherr.com Operational areas of moisture measurement - Concrete technology - Bulk material industry - Food production - Glass-ceramic industry - Animal feed production - Chemical and pharma
Fluke 
Fluke, for temperature analyzing
All FLUKE temperature measuring systems. We are specialised in the handheld thermometers of Fluke. Temperature is measured everywhere; a few examples are technical maintenance, food safety (HACCP), process monitoring and immediate temperature control. Temperature range: -50 to 3000 °C.
Betalasermike 
Non-Contact speed and length measurement
Non Contact speed and length measurement with the BetaLasermike gauge. No slippage of measurement rolls and when accelerating, high accuracy is still ensured. Highly accurate measurements that have not been approached yet; maximum deviation 0,05%! Well suited for all materials, with the exception of clear glass and mirrors. Shiny rolls or other shiny surfaces such as aluminium usually cause no problems.
Raytek 
Infrared thermometers
We can measure temperatures without making contact by using heat radiation (infrared) of an object.
The measured intensity of the radiation is being transformed by a thermometer to a temperature. Sometimes non contact measurement is not possible or special provisions are required. We would be pleased to inform you about the possibilities.
Raytek is market leader in several branches concerning infrared measurements.
http://www.raytek.com
Tensometric 
Over 20 year’s experience, a flexible team and customer proximity make Tensometric the specialist for electronic tension measurement on running material. Apart from their standard programme they develop equipment tailored to individual cases in close cooperation with the customer. This alignment with customer requirements guarantees an optimal solution at the same time. Customer proximity also means that you find Tensometric „on site” and can have qualified contacts in Germany and abroad. Thus they can offer you custom-made products for the highest requirements and can react rapidly to changing requirements.
Giobbe 
Picanol 
Picanol develops, produces and markets high-tech weaving machines. Picanol weaving machines are a synthesis of technological know-how and experience built up over more than half a century.
PLM Impianti 
Not available
Ceccato 
Ceccato is the leading company in producing Spunbond spinnerets, Meltblown dies and Spunlace strips for the Nonwoven industry. Ceccato supplies these products to all major machinery makers in Europe, as well as to all major Nonwoven fiber producers worldwide and enjoys an excellent reputation on all continents.
Buser 
Buser Print Systems exists for more than 70 years. The main branch, textile printing machines, exists since 1948. Buser has a top reputation and market position, which are continuously maintained and enhanced.
Corino Macchine 
Corino is a manufacturer of machinery and equipment for the textile industry. The company has grown with great enthusiasm and technological research. It strives constantly to results for and with its partners. Corino\'s name may be associated with major manufacturers of fabrics, wool, silk and other fibers. It delivers expanders, system rollers, slipping roll guiders.
Herbert Meyer 
The range of our program starts from small fusing machines for garments and shirts, over laminating and coating machines for technical textiles, foams and non-woven, to thermo-forming and molding lines for the automotive industry.
Herbert Olbrich 
Supplier of machines and lines for web materials such as wallpaper, flexible floor coverings, films and technical textiles, or in the automotive field as a systems supplier for the automotive industry and manufacturer of tools and machines for insulating interior trim parts.
IBG Monforts 
Brushing rollers, brush, flat glass, float glass, glass washing, glass industry, flatglass industry, glass washing machine, function rollers, guide rollers, transport rollers, Brushing machines, Cleaning units, printing industry, textile industry, textile machinery, certified quality according to DIN EN ISO 9001, cleaning
Cavitec 
Cavitec AG designs and delivers machines and processing plants in the two sectors coating / laminating and nonwoven thermo bonding / heat setting.
Doteco 
DOTECO has successfully been operating since 1994 devoting itself to the plastics transformation industry, in particular extrusion of plastic film and synthetic fibres.DOTECO is today a partner of leading companies all over the world and is in the vanguard in the production of gravimetric and volumetric feeders, process control and factory monitoring.
Krelus 
Infrared-Heaters with highest performance and fast reaction. Due to the highly acknowledged Swiss quality, KRELUS is in a position to supply products worldwide to more than 60 countries.Their high performance equipments are used on all continents. Their main competency is the precise application, planning and execution of our customers\' requirements. Thanks to the innovative technology of their products they can usually find solutions with substantial energy saving effects for their customers.
Liebherr
On-line moist measurement for granulates, powders, etc.
Loepfe 
Our electronic control systems are used with success in spinning mills, weaving mills and other textile industries. All Loepfe products are one hundred percent produced in our Wetzikon/Switzerland facilities with the most modern production technologies.
Matthys Group 
The Matthys Group supplies amongst others sectional warping machines and sectional creels.
Optivac 
With 40 years of experience of the textile finishing industry and 20 years of experience from high tech vacuum textile systems, exported world wide, we feel confidence in declaring us as the leading specialists in applying vacuum technlogy for the textile finishing and printing plants. At our location in Sweden, the company produces vacuum extraction machinery for wet finishing processes, and dry lint removal of textiles and carpets.
Osthoff-Senge 
Osthoff-Senge was founded in 1912 at Wuppertal and is still family owned. The medium sized company specialised in the construction of singeing machines. With more than 3000 units in operation, Osthoff-Senge is the market leader in this field. Progressive thinking, continuing development, comprehensive know-how and decades of experience are the cornerstones of success; Osthoff became a by-word for singeing. As a supplier to the textile industry throughout the world, the company has active and competent agents in all countries where textiles are produced.
Pleva Controls 
Company PLEVA GmbH is developing and producing sensors and control systems since 1969. The PLEVA products are proved of value with great success worldwide under extremely hard circumstances from end users and the machinery industry. The focus of PLEVA R&D are systems for on-line controls and monitoring of industrial processes. The company is represented in all important industrial countries and has service bases worldwide.
Ramisch Guarneri 
Design and manufacture of conventional and controlled deflection calenders for textile and nonwoven fabric processing and finishing applications.
Schill & Seilacher 
The company has developed into a world-wide active group of four independent companies producing chemical specialities. Spin finishes for all kind of yarns. Flame retardancy (reactive), etc.
Sellers Engineers 
Sellers Engineers are world leaders in the design and manufacture of finishing machines for the carpet industry with extensive global references.The Chairman and Directors are committed to building on this success by a policy of continuous development, working closely with the carpet industry.
Shelton Vision 
Shelton Vision Systems are specialists in the application of digital camera systems for surface and product inspection. The latest camera technology and special lighting systems are used to identify defects in almost any type of web material; woven, non-woven and knitted fabrics, laminates, composites, metals, coatings and a wide range of technical fabrics.
Sperotto Rimar 
The quality of woven fabric is considerably determined by the finishing machine and the applied technology. SperottoRimar srl offers gimmick and unrivaled solutions for the finishing of textiles.
Swisstex 
SwissTex is a global manufacturer of textile machinery and a system provider with a profound knowledge of BCF and T&I extrusion processes for the continuous filament market.
Vald. Henriksen 
Vald.Henriksen is one of mayor players in the market for Jigger processing.
Vanwyk Systems 
Almost 50 years of expertise in design and engineering has resulted in comprehensive automatic systems for blending, mixing and dispensing for the Flavors & Fragrances, Textile Printing, Textile Dyeing & Finishing and Paints & Coatings industries. With projects having been installed in over 60 countries, VANWYK has become synonymous with high performance systems for mixing and batching.
Weko 
WEKO has been active in its today’s business areas for more than 50 years. Privately owned and situated in the surroundings of Stuttgart, the stronghold of fuss-pots and thinkers, we have closely worked together with various renowned partners right from the beginning. Our more than 170 highly-qualified employees worldwide guarantee the quality of WEKO technology for a variety of industries including printing, nonwoven, tissue and chip board, plastic film production, paper and textile finishing, corrugated board and abrasive production.
Mathis 
MATHIS AG, headquartered in Oberhasli, Switzerland, has enjoyed a presence in dyeing laboratories since 1968. We also manufacture production plants for dyeing textile ribbons. In a second area of production we develop and build machines and installations for coating a wide range of materials.
Bastian .gif)
Winding and unwinding systems. Batch transport systems. Cutting machines. Tumbler inspection tables and rotation stands.
SAB-Nord 
Doffer systems, transport of bobbins and empty cones. Storage systems. Manipulators.
Santex 
The Santex Group brings together a number of highly specialized companies working in a variety of fields in the textile finishing sector. The focus is on the finishing of woven fabrics, especially those made of wool and silk, the treatment of knitted fabrics in all possible variations, the processing of nonwovens, and the coating and lamination of textile fabrics.
Belgian Monitoring Systems 
Manufacturing Execution Systems (MES) for discrete manufacturing, with focus on the textile, plastics and pharmaceutical industry
info Belgian Monitoring Systems
Sefar 
Leading manufacturer of monofilament precision fabrics for customer-tailored solutions for separating, coating and dosing in industrial processes, filter components, screen printing and architectural applications.
Betacontrol 
Betacontrol systems guard and regulate your series production of sheet material. During production receive you all quality information as surface weight, thickness, layer thickness, compactness.
Betalasermike
Non-Contact speed and length measurement
Non Contact speed and length measurement with the BetaLasermike gauge. No slippage of measurement rolls and when accelerating, high accuracy is still ensured. Highly accurate measurements that have not been approached yet; maximum deviation 0,05%! Well suited for all materials, with the exception of clear glass and mirrors. Shiny rolls or other shiny surfaces such as aluminium usually cause no problems.
Bonas 
Bonas jacquards
Bonas jacquards with revolutionary drive mechanism are designed for producing textiles at high speed with high load and maximum flexibility and have 100% electronic selection offering complete control. Software and network solutions for every weaving application is constantly updated to suit every weavers demands.
Brugman Holland 
Brugman has become one of the world\'s leading manufacturers of wet-finishing equipment. In 2002 Brugman became a member of the Vanwyk group of companies. With a head office and production facilities in the Netherlands, and sales and service centres in China and Hong Kong, we deliver machinery to textile manufacturers all over the world.
Kündig 
Since 1868, we have been partners of the textile and the textile machine industries world-wide. In close cooperation with reliable agencies in 52 countries, the Kündig Industrial Solutions delivers equipment and technical accessories advising its customers with expertise and a service package according to their exact needs. As a Swiss company, we know how to attain and guarantee high quality. We put the highest demands on our suppliers - most who are, of course, ISO certified. European standards are fundamental to our quality control procedures.
Mesdan 
MESDAN is world-wide leader in the production of joining devices for textile industry with a complete range of splicers and knotters, both in automatic and hand-operated versions, to be fitted on all types of textile machine to join yarns of different nature (in type of fibre, structure and spinning system).
Power-Heat-Set
Power-Heat-Set is a company, which acts all over the world, specialized on heatsetting equipment for carpet yarn.
Pugi Group 
Pugi Group’s activity in the sector of sewing machines for textile finishing began in 1956; during the decades that followed, the company acquired extensive experience in Italy and abroad - and today, we can proudly say that Nesi & Pugi is synonymous with reliability and high customer service standards.
Rieter 
Rieter is a leading supplier to the textile and automotive industries.
Starlinger 
Starlinger leads the world market in the tape extrusion sector, with proven design and a wide range of machines.
Swisstex France 
Swisstex France is a process expert in Twisting, Assembling, Cabling, Covering, Texturing & Winding of yarns made of synthetic, artificial, natural and mineral fibers.
Raytek
Infrared thermometers
We can measure temperatures without making contact by using heat radiation (infrared) of an object.
The measured intensity of the radiation is being transformed by a thermometer to a temperature. Sometimes non contact measurement is not possible or special provisions are required. We would be pleased to inform you about the possibilities.
Raytek is market leader in several branches concerning infrared measurements.
http://www.raytek.com
Italmaster 
Italmaster ensures high quality standards over time: excellent organic and inorganic pigment dispersion, constant reproducibility of any color’s tones. These results stem from a method of working that self-corrects errors.
Tensometric
Over 20 year’s experience, a flexible team and customer proximity make Tensometric the specialist for electronic tension measurement on running material. Apart from their standard programme they develop equipment tailored to individual cases in close cooperation with the customer. This alignment with customer requirements guarantees an optimal solution at the same time. Customer proximity also means that you find Tensometric „on site” and can have qualified contacts in Germany and abroad. Thus they can offer you custom-made products for the highest requirements and can react rapidly to changing requirements.
Decoup+ 
DECOUP+ has been successfully developing and manufacturing standard or turnkey continuous ultrasonic cutting and welding systems for textile, nonwovens, PP-Tapes and plastic films applications.
Eco Clean Tech 
With a combined passion for innovation, efficiency improvement and challenges towards our environment ECO Clean Tech has a long standing reputation and excellent track record for break through innovation in various industries. The company is organized around 3 main business lines. ECO Clean Tech Ceramic Technology This business line focuses it’s activities on high tech ceramic materials in innovative applications. At the production facilities in Velsen Noord, the Netherlands, a specific range of ceramic products and components are being produced for a wide variety of world-wide customers. Customers for this business line use our products for catalytic processes, dental elements, petro-chemical and several other high performance demanding industries.
Texkimp 
Texkimp are specialists in designing and manufacturing equipment for the unwinding, guiding & tensioning of every kind of yarn, fibre, tow, tape monofilament & multi-filament.
Sedo Treepoint 
Sedo-Treepont develops and supply integrated systems for the textile finishing industry. Dyehouse controllers, Morapex extraction.
Sahm 
SAHM is market leader in the field of automatic winding machines for high performance fibers. Their focus on extensive research and development activity enables them to maintain and advance their leadership in world markets. Our offices in Greenville, SC, USA, Guangzhou, China and New Delhi, India as well as a global network of outstanding sales agencies ensure us a presence in international market places, close to our customers on all continents, and enables us to provice reliable support
Ceccato
Ceccato is the leading company in producing Spunbond spinnerets, Meltblown dies and Spunlace strips for the Nonwoven industry. Ceccato supplies these products to all major machinery makers in Europe, as well as to all major Nonwoven fiber producers worldwide and enjoys an excellent reputation on all continents.
Doteco
DOTECO has successfully been operating since 1994 devoting itself to the plastics transformation industry, in particular extrusion of plastic film and synthetic fibres.DOTECO is today a partner of leading companies all over the world and is in the vanguard in the production of gravimetric and volumetric feeders, process control and factory monitoring.
Liebherr
On-line moist measurement for granulates, powders, etc.
Weko
WEKO has been active in its today’s business areas for more than 50 years. Privately owned and situated in the surroundings of Stuttgart, the stronghold of fuss-pots and thinkers, we have closely worked together with various renowned partners right from the beginning. Our more than 170 highly-qualified employees worldwide guarantee the quality of WEKO technology for a variety of industries including printing, nonwoven, tissue and chip board, plastic film production, paper and textile finishing, corrugated board and abrasive production.
Mathis
MATHIS AG, headquartered in Oberhasli, Switzerland, has enjoyed a presence in dyeing laboratories since 1968. We also manufacture production plants for dyeing textile ribbons. In a second area of production we develop and build machines and installations for coating a wide range of materials.
Bastian
Winding and unwinding systems. Batch transport systems. Cutting machines. Tumbler inspection tables and rotation stands.
Belgian Monitoring Systems
Manufacturing Execution Systems (MES) for discrete manufacturing, with focus on the textile, plastics and pharmaceutical industry
info Belgian Monitoring Systems
Betalasermike
Non-Contact speed and length measurement
Non Contact speed and length measurement with the BetaLasermike gauge. No slippage of measurement rolls and when accelerating, high accuracy is still ensured. Highly accurate measurements that have not been approached yet; maximum deviation 0,05%! Well suited for all materials, with the exception of clear glass and mirrors. Shiny rolls or other shiny surfaces such as aluminium usually cause no problems.
Starlinger
Starlinger recycling technology offers a spectrum of innovative machinery solutions for the efficient recycling of a variety of plastics, such as PE, PP, PA, PS, PET, and many more.
Raytek
Infrared thermometers
We can measure temperatures without making contact by using heat radiation (infrared) of an object.
The measured intensity of the radiation is being transformed by a thermometer to a temperature. Sometimes non contact measurement is not possible or special provisions are required. We would be pleased to inform you about the possibilities.
Raytek is market leader in several branches concerning infrared measurements.
http://www.raytek.com